Switch Management For EasyDCIM

v1.4.2

$29.00monthly

$299.00yearly (save 15%)

Switch Management For EasyDCIM is, as its name clearly implies, dedicated exclusively to complete management and automation of physical, switch type devices.

The extension enables remote control of switch ports as well as full automation of their turning on/off process, e.g. when your client is late with payment. What is more, our product displays a load of useful information and details about each port installed on a switch. This will allow you to monitor your devices, control their work and react quickly in case of any complications.

It really pays off to keep your finger on the pulse. Order Switch Management For EasyDCIM today to automate and streamline the management of your switches.

  • Control State Of Any Switch Port Remotely
  • Automatic Switch Port Turning On/Off On Suspension/Unsuspension/Termination Of Any Chosen Product
  • VLAN Management Support For:
  • Arista VEOS Devices
  • HPE Comware Software Devices
  • Juniper Devices With JUNOS 12.3R12-S12 And JUNOS 20.X
  • Disable/Enable Network Port Using Arista eAPI
  • View Switch Locations Map With The Number Of On/Off Ports
  • Access Detailed Information About Each Switch Port
  • Disable/Enable Network Port Using NETCONF Protocol
  • View Aggregate Statistics
  • View General Graphs:
  • Ports Summary
  • Error Summary
  • Packets Summary
  • View Event Logs
  • Supported Switch Manufacturers (SNMP Protocol):
  • Cisco
  • Dell
  • HP
  • Juniper
  • MikroTik
  • Netgear

Top Quality

Each of our modules is polished up in every detail. We make every effort so that you can enjoy the proven solutions of the highest quality.

Friendly Support

Our developers and specialists are at your disposal completely. We will provide you with all the information you are looking for and help solve any problems.

Supreme Customization

Owing to an exceptionally well-thought architecture you can freely adjust and modify our modules to achieve desired results.

Cost-Effective

By deciding to purchase our modules, you are absolutely certain that you pay for high-end solutions which will extend the capabilities of your business.

Version 1.4.2

May 23rd, 2023

New Features:

  • <b>[VLAN Management]</b> - Added VLAN management support for Juniper devices with the JUNOS 20 operating system:
  • <span>Integration with the NETCONF protocol</span>
  • <span>Testing the switch connection using the NETCONF protocol</span>
  • <span>Automatic detection of VLANs in the polling process of the device</span>
  • <span>Adding VLANs</span>
  • <span>Assigning single and multiple VLANs to a switch network port</span>
  • <span>Changing the speed of network ports</span>
  • <span>Enabling/disabling network ports using the NETCONF protocol</span>

Version 1.4.1

Feb 10th, 2022

New Features:

  • <b>[Arista Switches - Port Speed Change]</b> - A new option to change the port speed of Arista VEOS devices equipped with an eAPI interface

Version 1.4.0

Dec 21st, 2021

New Features:

  • <b>[HPE Comware Software Driver]</b> - Added driver for switches with HPE Comware Software system in version 7 and further:
  • <span>Test connection with the switch</span>
  • <span>Automatically detect VLANs during the device polling process</span>
  • <span>Add VLANs</span>
  • <span>Assign a single VLAN to the switch network port</span>
  • <span>Assign multiple VLANs to the switch network port</span>
  • <span>Access a new section with the list of device VLANs, assigned network ports, searching and filtering options</span>
  • <span>Turn the network ports on and off</span>
  • <span>Set the switch network port configuration into the TRUNK mode</span>
  • <span>Define Native VLAN for a network port in the TRUNK mode</span>
  • <span>Change the port description directly on the list of ports</span>
  • <b>[Arista VEOS Driver]</b> - Added driver for switches with the Arista VEOS system:
  • <span>Test connection with the switch</span>
  • <span>Automatically detect VLANs during the device polling process</span>
  • <span>Add and remove VLANs</span>
  • <span>Assign a single VLAN to the switch network port</span>
  • <span>Assign multiple VLANs to the switch network port</span>
  • <span>Access a new section with the list of device VLANs, assigned network ports, searching and filtering options</span>
  • <span>Turn the network ports on and off</span>
  • <span>Set the switch network port configuration into the TRUNK mode</span>
  • <span>Define Native VLAN for a network port in the TRUNK mode</span>

Version 1.3.0

Dec 10th, 2020

New Features:

  • <b>[VLAN Management]</b> - Added VLAN management support for Juniper devices with JUNOS 12.3R12-S12:
  • <span>Integrate with the NETCONF protocol</span>
  • <span>Test the connection with a switch using the NETCONF protocol</span>
  • <span>Automatically detect VLANs during the device’s polling process</span>
  • <span>Add VLANs</span>
  • <span>Assign a single or multiple VLANs to the network port of a switch</span>
  • <span>Use the searching and filtering options across the new section that presents the list of VLANs of a device with assigned network ports</span>
  • <b>[NETCONF Ports Actions]</b> - Advanced support for network ports using the NETCONF protocol:
  • <span>Switch network ports on/off</span>
  • <span>Change the network port of a switch to the TRUNK mode</span>
  • <span>Define Native VLAN for the network port in the TRUNK mode</span>

Improvements:

  • <b>[Switch Devices Filtering</b> - Added advanced filtering of the list with Switch and Router devices in the extension view

Version 1.2.0

Jan 30th, 2017

New Features:

  • View of a map showing switch locations in the system, along with the number of on/off ports for a given location
  • View presenting ports with the particular statuses - Operational State and Admin State
  • Aggregate statistics on disabled/enabled ports, inbound/outbound error packets and inbound/outbound discarded packets
  • General graphs:
  • <span>Ports Summary - presenting historically how many ports were enabled/disabled in the specific time</span>
  • <span>Error Summary - presenting historically how many error packets were found in the specific time</span>
  • <span>Packets Summary - presenting historically how many ports were rejected in the specific time</span>
  • Event Logs - presenting the actions performed on particular device within EasyDCIM

Improvements:

  • Enhanced interface
  • Refined 5 minute cache allowing to use the module easier and faster

Bug Fixes:

  • Improved support for handling exceptions while proceeding to the port site of the device

Version 1.1.0

May 4th, 2016

Redeveloped:

  • Core
  • Functionalities
  • Interface

Version 1.0.0

Jun 25th, 2015

Released:

  • Stable Version

Do You Have Any Questions?

We will gladly answer them all.